Ubiquiti’s G6 Turret is a 4K PoE camera with a turret design, featuring on-device face and license plate recognition and full UniFi Protect integration, all at a $199 price point. The turret design sets it apart from traditional domes by placing the lens module in a ball-and-socket housing. You can physically adjust the module on three axes after mounting, giving installers direct control over framing without being locked into the bracket’s angle. For jobs involving a specific entry lane, a retail counter, or a tight corridor, this hands-on adjustability considerably speeds up installation.
Hardware Overview
The G6 Turret has a 1/1.8″ 8MP sensor and a quad-core processor powered by a Multi-TOPS AI Engine. In addition to local face and license plate recognition, this small camera offers 30-meter IR night vision and connects to UniFi Protect over standard PoE, without requiring PoE+.
The IK04 rating makes this camera better suited to controlled commercial spaces than high-exposure public areas. As a result, it belongs in offices, retail shops, or covered entrances rather than unmonitored street-side mounts, where frequent physical tampering isn’t expected.
| Specification | Ubiquiti UniFi G6 Turret |
|---|---|
| General | |
| Dimensions | ⌀100 × 95 mm (⌀3.9 × 3.7″) |
| Weight | 550 g (1.2 lb) |
| Enclosure Material | Aluminum alloy, polycarbonate |
| Weatherproofing | IP66 |
| Tamper Resistance | IK04 |
| Ambient Operating Temperature | -30 to 50°C (-22 to 122°F) |
| Ambient Operating Humidity | 0 to 90% noncondensing |
| Button | (1) Factory reset |
| Video | |
| Resolution | 4K 8MP 3864 × 2160 (16:9) |
| Max. Frame Rate | 30 FPS |
| Image Settings | Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, HDR |
| Optics | |
| Sensor | 1/1.8″ 8MP |
| Lens | Fixed focal length |
| Field of View | H: 109.9°, V: 56.7°, D: 134.1° |
| Night Mode | Built-in IR LED illumination and IR cut filter |
| IR Night Vision Range | 30 m (98 ft) |
| Intelligence | |
| Face Recognition | ✓ |
| License Plate Recognition | ✓ |
| Smart Detections | People, Vehicles, Animals |
| Audio | |
| Audio | Microphone |
| Hardware | |
| Processor | Quad-core ARM Cortex-A53-based chip |
| Power | |
| Power Method | PoE |
| Supported Voltage Range | 37 – 57V DC |
| Max. Power Consumption | 12.5W |
| Networking | |
| Networking Interface | 10/100 MbE RJ45 port |
| UniFi Application Suite | Protect |
| Cable | |
| Cable Connector Type | RJ45 |
| Cable Diameter | 4.5 mm (0.2″) |
| Cable Length | 30 cm (1 ft) |
| Jacket Material | Thermoplastic elastomer |
| Jacket Enclosure Dimensions | ⌀20 × 70.6 mm (0.8 × 2.8″) |
| Jacket Enclosure Material | Thermoplastic elastomer, polycarbonate, silicone rubber |
| Mounting | |
| Included Mounting | Ceiling, Wall |
| Optional Mounting | Arm, Pendant, Junction Box |
Design and Build
The turret form factor works differently from a dome. Rather than positioning a fixed lens behind a polycarbonate cover, the G6 Turret places its lens module in an exposed ball-and-socket housing that rotates freely until you tighten it down. Three-axis adjustment allows independent pan, tilt, and rotation, which is particularly useful on wall mounts, where a ceiling-only mount angle would otherwise require repositioning the entire bracket. Only a screwdriver is needed for adjustments, so framing the shot on-site is quick.
The camera measures ⌀100 × 95 mm and weighs 550 g (1.2 lb). Build quality is solid throughout, with an aluminum alloy and polycarbonate construction that matches the broader G6 lineup. The white finish blends cleanly against standard commercial ceilings, though the exposed ball joint makes this camera more visible than a low-profile dome. If a discreet install is a priority, a recessed dome is the better choice.
IP66 weatherproofing allows for outdoor use without a cover, so it handles car parks, entry canopies, and similar positions without issue. The IK04 rating covers standard commercial use cases but isn’t suited to high-impact or high-interference locations. The operating temperature range runs from -30 to 50°C (-22 to 122°F), so cold climates aren’t a concern either.
Optics and AI
The 1/1.8″ 8MP sensor records 4K at 30 FPS with a full image settings suite including HDR, 2DNR, 3DNR, masking, and text overlay. The field of view spans 109.9 degrees horizontal and 134.1 degrees diagonal, which is wide enough to cover most fixed camera positions without needing to zoom in on subjects. Built-in IR LED illumination handles night operation out to 30 meters (98 ft), and an IR cut filter switches automatically at dusk.
On-device AI runs via the quad-core Arm Cortex-A53 and the Multi-TOPS AI Engine. Face and license plate recognition process locally at the camera level rather than waiting on the NVR, which keeps alert latency low and reduces load on the host recorder. Smart detection monitors people, vehicles, and animals and works with Protect’s configurable zone masking to deliver targeted alerts.
The fixed focal-length lens consistently covers the full field of view without barrel distortion, so identification accuracy remains high. Physical three-axis adjustment handles positioning, and once you tighten the ball joint, the framing holds reliably.
Management and Installation
The G6 Turret operates on standard PoE with a maximum power draw of 12.5W, which stays within the 15.4W limit of 802.3af, eliminating the need for PoE+ switching. Even so, you should account for the draw when budgeting power across a dense switch. The included 30 cm (1 ft) pigtail features an RJ45 connector with a thermoplastic elastomer jacket that seals the connection cleanly at the camera body. Protect detects the camera immediately upon first power-up and then guides you through setup.
Once you adopt the camera, the UniFi Protect dashboard provides centralized management for connection status, image tuning, and recording settings. Adjusting the framing is straightforward and takes about a minute. Loosen the collar, rotate the lens, and retighten, which is considerably faster than repositioning a fixed dome’s backplate.
Before deploying the G6 Turret, a few practical details are worth noting. First, Protect lets you configure motion and smart detection masks independently, so you can exclude footpaths or busy roads from triggering alerts without turning off detection across the entire frame. Second, the G6 Turret has no MicroSD slot and therefore won’t record locally if the NVR connection drops. Finally, ceiling and wall mounts come in the box, and arm, pendant, and junction box mounts are available separately for non-standard implementations.
Conclusion
Overall, the G6 Turret delivers 4K at 30 FPS, on-device face and license plate recognition, and 30-meter IR, all for $199. The three-axis manual adjustment is a genuine practical advantage in the field, especially on wall mounts, where fixed cameras require more bracket work. Additionally, on-device AI processing via the Multi-TOPS engine keeps detection fast and reduces NVR load.
That said, the IK04 rating and the absence of local storage are worth confirming against your deployment requirements before you commit. For controlled commercial spaces, retail, and offices, those limitations rarely matter. Overall, the G6 Turret is a well-specified camera that integrates cleanly into any UniFi Protect system.
Amazon